Follow us :

Finished with gypsum board using the method of self-adhesive

time2011/11/08

After the drywall board bolts in place, seams and joints are still before the tape, you have to you can paint or wallpaper your new wall. In addition to the use of joint compound, you will use gypsum board self adhesive tape joints between each panel area. Flexible large rolls of paper with self-adhesive mesh tape the seams to make a simple task, but you still have a joint on the tape.
Smooth gypsum board compound, rapidly into and learn from each of the joint venture and joint tape to create a smooth surface of the blade.Using a 10-inch gypsum board, recording knife, a flat gypsum board composite created any bumps. This wider spread in a large blade wall expanse of wet compound.Allow the compound to dry completely, then sand off bumps and rough spots. A gypsum self adhesive tape sanding machine has an additional screen, quickly dry sand compound drive bays. In the grinding process of wearing protective glasses and respirator masks.
Another successful application on the recording of knife more than 10 inches of gypsum board composite joints. Only applies to a composite thin self adhesive tape, because it slightly reduced, dry. By two or more applications, not just a thin coating thickness applications, you will get better results.A thorough sand seams completely dry, paint your wall is ready.